How To Get Car Out Of Battery Saver Mode

7 min read Jun 26, 2024
How To Get Car Out Of Battery Saver Mode

How to Get Your Car Out of Battery Saver Mode

If your car's battery saver mode has been activated, it can be frustrating and inconvenient. But don't worry, we've got you covered. In this article, we'll guide you through the steps to get your car out of battery saver mode and back on the road.

What is Battery Saver Mode?

Before we dive into the solution, let's quickly explain what battery saver mode is. Battery saver mode is a feature designed to conserve battery power when the car's battery is drained or depleted. When activated, it limits the car's electrical load to prevent further drainage of the battery. This means that certain features, such as the radio, air conditioning, and other accessories, may not function or operate at reduced capacity.

Why Does My Car Go into Battery Saver Mode?

There are several reasons why your car may enter battery saver mode:

  • Low Battery Voltage: If your car's battery voltage drops below a certain threshold, the car's computer may activate battery saver mode to prevent further discharge.
  • High Electrical Load: If the electrical load on your car's battery becomes too high, the battery saver mode may kick in to prevent damage to the electrical system.
  • Faulty Battery or Alternator: A faulty battery or alternator can cause the car's battery saver mode to activate.
  • Incorrect Battery Maintenance: Failure to maintain your car's battery properly can lead to battery saver mode activation.

How to Get Your Car Out of Battery Saver Mode

Now that we've covered the basics, let's get to the solution! Here are the steps to get your car out of battery saver mode:

Step 1: Check the Basics

  • Check the battery terminals: Make sure they're clean and free of corrosion. Clean the terminals if necessary.
  • Check the battery water level: If your car has a maintenance-accessible battery, check the water level and top it off if necessary.
  • Check the electrical system: Ensure all electrical accessories, such as headlights, radios, and wipers, are turned off.

Step 2: Jump-Start the Car

  • Find a suitable donor car: Get a donor car with a working battery and a suitable jumper cable set.
  • Connect the jumper cables: Connect the positive (+) cable to the positive terminal of the dead battery and the negative (-) cable to a metal surface on the engine or frame of the dead car. Then, connect the positive (+) cable to the positive terminal of the donor car's battery and the negative (-) cable to the negative terminal of the donor car's battery.
  • Start the donor car: Start the engine of the donor car and let it run for a few minutes to charge the dead battery.
  • Start the dead car: Once the dead car's battery has been charged a bit, try starting the engine. If it doesn't start, let the donor car's engine run for a few more minutes and try again.

Step 3: Recharge the Battery

  • Use a battery charger: If jump-starting the car didn't work, you may need to recharge the battery using a battery charger.
  • Charge the battery fully: Make sure to charge the battery fully before attempting to start the car again.

Step 4: Reset the Car's Computer

  • Check your car's manual: Consult your car's manual to see if it has a specific procedure for resetting the car's computer after battery saver mode activation.
  • Use a code reader or scan tool: If you have access to a code reader or scan tool, you can use it to reset the car's computer.

Step 5: Test the Car

  • Start the car and test the electrical system: Once the car is running, test the electrical system to ensure everything is functioning properly.
  • Monitor the battery voltage: Keep an eye on the battery voltage to ensure it's within the acceptable range.

By following these steps, you should be able to get your car out of battery saver mode and back on the road. Remember to regularly maintain your car's battery and electrical system to prevent future occurrences.

Featured Posts